LMTPASS

All articles

Removability and replacement - the other 18 February 2027 obligation

· 4 min read

On the same day as the passport, Article 11 starts to apply. A portable battery must be removable and replaceable by the end user, an LMT battery by an independent professional, spare parts must stay available for five years, and no software may stand in the way. The derogations are narrow.

The attention paid to the digital passport makes it easy to forget that it shares its date with a design obligation. Article 11 of the Batteries Regulation applies from 18 February 2027, under Article 96. It concerns every product containing a portable battery, and every LMT battery.

Portable batteries: by the user, with ordinary tools

The producer of a product containing a portable battery must ensure the end user can remove and replace it at any time during the product's lifetime. Removal is done with commercially available tools, unless specialised tools are supplied free of charge with the product. Removal instructions and safety information must be permanently published on a publicly accessible website.

The obligation concerns the whole battery, not its cells. And it applies without prejudice to the more protective rules of the directive on waste electrical equipment.

LMT batteries: by an independent professional, down to the cells

For the batteries of e-bikes, scooters and other light means of transport, the level of requirement differs. The battery and its individual cells must be removable and replaceable by an independent professional, at any time during the product's lifetime. "Independent" means: not only the manufacturer's authorised network.

A battery is considered replaceable if a compatible battery can replace it without loss of performance or safety. Compatibility therefore becomes a property to document, not a tolerance.

The derogations

They are few and bounded.

In the first two cases the battery stays replaceable, but by an independent professional rather than the user. The Commission may add exemptions by delegated act, only to follow market or scientific developments, and on the basis of documented safety concerns.

It has done so. The delegated regulation adopted on 14 July 2026 (Delegated Regulation (EU) 2026/1770, published in the Official Journal on 22 October 2026 and in force since 11 November) replaces the list of paragraph 2 with eight categories, limited (except for medical devices) to cases where the derogation is required for the safety of the user and the appliance: washable or rinseable appliances, including wearable devices; medical imaging, radiotherapy and in vitro diagnostic devices; wearables too small or too tightly sealed for a user to replace the battery safely; until 31 July 2030, electric toys with rechargeable batteries where the toy's safety requires it; wireless food-contact thermometer probes; equipment for explosive atmospheres (Directive 2014/34/EU); on-body drug delivery systems; roof-mounted telematics units on agricultural and construction machinery. For all of them, the battery remains replaceable by an independent professional.

A simplification package is also under negotiation: on 24 June 2026 the Council proposed postponing the application of Article 11 to 18 August 2028 for these new categories only. Nothing is adopted at the date of this article; 18 February 2027 remains the only date in force.

Spare parts: five years

Portable and LMT batteries must be available as spare parts for at least five years after the last unit of the equipment model is placed on the market, at a reasonable and non-discriminatory price for independent professionals and end users alike.

That is a stock and catalogue obligation, which binds well beyond the end of a product's sales.

Software may not stand in the way

No software may be used to prevent the replacement of a portable or LMT battery, or of its key components, by a compatible battery or components. Electronic pairing that rejects a compatible replacement battery is exactly what this paragraph targets.

What it asks, concretely

  1. Review how built-in packs are fixed: standard screws, no glue, no welding to the product's housing.
  2. Write and publish the removal procedure and safety instructions, online, permanently.
  3. Define compatibility: which batteries may replace the original, with which performance and safety guarantees.
  4. Plan five years of parts after the last sale.
  5. Audit the software of the product and the BMS for any mechanism that would refuse a compatible battery.
  6. Document the derogation if one is invoked, with the safety justification behind it.

The passport and removability meet: the removal notice and the list of compatible batteries are information the passport can carry, for the same date.

Read next

Check your obligations in 30 seconds · Create a passport for free