The passport's 71 data points, as read in the Commission's guidance
· 5 min readOn 19 October 2026 DG GROW published version 3.2 of its guidance "data points by category". It creates no obligation, but it says, point by point and category by category, what is mandatory, what is optional, and what is not to be filled in February 2027. A reading of the table, not of the summaries.
The document is titled Guidance Document: Digital Batteries Passport – data points by category. Version 3.2 is dated 19 October 2026; the colophon says "3rd edition, manuscript completed in October 2026". It comes from unit G2 of the Directorate-General for the Internal Market (DG GROW), the unit that carries the digital product passport. Eighteen pages, thirteen of them a table.
What the document is, and is not
The text says so itself: it "should not be considered as representative of the European Commission's official position", it "does not extend in any way the rights and obligations" of the regulation and "nor introduce any additional requirement". It is published under a CC BY 4.0 licence and announces future updates, notably on measuring units and formats.
In other words, the only legal basis remains Annex XIII of Regulation 2023/1542 and its implementing acts. But this table is the closest thing to a checklist shared by manufacturers, providers and authorities. It structures the thinking without imposing it.
The structure of the table
Seven columns: the data point number, its name (with clarifications in square brackets: unit, "code list", "free text", "web link"), the article that defines the notion, the source of the point in the regulation, the type of information (public or restricted), then the applicability for three categories: electric vehicle batteries, LMT batteries, industrial batteries. The categories are those of Article 3.
Each applicability cell carries one of these mentions: mandatory, optional, applicable only in certain cases, or not to be filled/displayed as of February 2027. Two closing remarks state that the information relates to the battery model unless stated otherwise, and that "persons with legitimate interest" will be clarified by an implementing regulation still to come.
The base: 31 points mandatory for all three categories
Identification (unique identifier, person responsible for the passport, manufacturer, postal address, category, model and serial or batch number, place and date of manufacture), characteristics (weight in kg, capacity in Ah, chemistry as a code list, hazardous substances other than mercury, cadmium and lead, usable extinguishing agent, critical raw materials above 0.1 % by weight, share of renewable content), performance (minimum, nominal and maximum voltage, original power capability, power limits, temperature range when not in use, internal resistance of cell and pack), conformity (Article 13(4) marking, EU declaration of conformity as a web link, waste information under Article 74), then the restricted part (detailed composition, spare parts and their sources, dismantling, safety measures, test reports) and the battery's status.
Thirty-one points. For a manufacturer who has prepared nothing yet, this is the list to start with: none of them depends on a pending act.
The ten points marked "not to be filled as of February 2027"
The guidance is explicit on each, and the reason differs.
- Points 16 and 25: material composition and rated capacity. Reason: repetition of data already required (points 11 to 15).
- Points 17 and 18: carbon footprint declaration and label. Reason: "format still to be specified in the upcoming implementing act".
- Point 19: responsible sourcing information from the due diligence report. Reason: required from August 2027, under Article 48(1) as postponed.
- Points 20 to 23: recycled shares of cobalt, lithium, nickel and lead. Reason: "to be applied as envisaged by Article 8", whose dates are 2028 and 2031.
- Point 45: clear, printable instructions for use. Reason: "application provisions on hold pending Omnibus adoption".
These ten points exist in the passport; they will stay empty, or not be displayed, until the act they depend on is adopted. A provider who requires them as a condition of publication asks for more than the regulation does.
What depends on the category
- Lifetime in cycles, reference test, initial round trip efficiency and at 50 % of cycle life, C-rate of the test (points 31, 32, 36, 37, 39): mandatory for EV and LMT, "only applicable for some industrial batteries".
- Capacity threshold for exhaustion (point 33): EV only.
- State of health (points 61 to 66): state of certified energy (SOCE) for EVs; remaining capacity, power, efficiency, self-discharge and resistance for LMTs and, among industrial batteries, only stationary storage systems with a battery management system.
- Points 68 to 71 (cycles, negative events, operating conditions, state of charge): "applicable as soon as the battery starts to be used".
Only two optional mentions
The manufacturer's web and email address (point 5), to be filled if available; and the discharge C-rate of the cycle-life test (point 40). Everything else is mandatory, conditional, or pending.
What we did with it
LMTPASS's compliance check was realigned on this table on 1 November 2026. A missing carbon footprint no longer blocks publication, recycled content and due diligence appear as dated information, and missing performance points (voltages, power, efficiency, resistance, C-rate) are flagged as warnings. The guidance is not the law; it is, however, the document market surveillance authorities will have in front of them in February 2027, and we would rather your passport looks like it.