Carbon footprint: what Article 7 actually requires of you
· 6 min readThe carbon footprint declaration is not a single number to publish. It is a prescribed calculation method, a breakdown per life-cycle stage and third-party verification. Here are the three traps that sink first declarations.
Article 7 of Regulation (EU) 2023/1542 mandates a carbon footprint declaration for electric vehicle batteries, rechargeable industrial batteries above 2 kWh, and light means of transport batteries. Many manufacturers approach this as publishing a number. That is the first mistake.
What the declaration actually contains
The declaration is not just a total in kg CO₂ equivalent. It has four inseparable parts:
- The total life-cycle carbon footprint, expressed per kWh of the total energy the battery provides over its service life.
- The breakdown per life-cycle stage: raw material acquisition and pre-processing, production, distribution, end of life and recycling.
- The calculation method used, which must follow the Commission's delegated act. That act is not adopted to date: the declaration is not due in February 2027.
- The verifying body, with its verification statement.
A declaration carrying only the total is incomplete, even when the total is correct.
Trap 1: confusing functional unit with mass
The footprint relates to energy delivered over the service life — not to the battery's weight, nor to its nominal capacity. Two batteries with identical capacity but different service lives do not share the same footprint per kWh delivered. A cell rated for 3,000 cycles spreads its manufacturing carbon cost over far more energy than one rated for 1,200.
Direct consequence: improving your product's durability mechanically improves your declared footprint. That incentive is deliberate.
Trap 2: treating supplier data as primary data
The Regulation distinguishes company-specific data, called primary, from secondary data drawn from generic databases. The higher the share of secondary data, the higher the uncertainty of your declaration.
In practice, the question to put to every cathode, anode and electrolyte supplier is simple: do you have a footprint measured at your site, or a sector average? The answer changes your declaration.
Trap 3: underestimating verification lead time
Third-party verification is not an end-of-project formality. The verifying body must be able to walk back up your calculation chain, which assumes your input data is traced and dated. Companies that start collecting when they engage the verifier discover their sourcing data cannot be reconstructed after the fact.
What to do now
Start by mapping your life-cycle stages and identifying, for each, whether you hold primary or secondary data. That map is more useful than a premature calculation: it tells you where to focus collection effort, and it becomes the skeleton of the final declaration.
Carbon performance classes and maximum thresholds enter into force in stages once the corresponding delegated acts are published. The gap between a prepared declaration and an improvised one will widen at that point.